Flow Rate : 56 m³/h

Pressure : 150 m

Frequency : Three-phase 50 Hz - 60 Hz*

Fluid Temperature : From 0  ˚C to + 60  ˚C

Maximum Body Pressure : 10 bar (16 bar)

PUMP DESIGN FEATURES

- Boosters are designed for pressing non-corrosive liquids without large solid particles.

- Impeller material is glass fiber reinforced noryl.

- Vertical pumps with closed impeller can able to be separated.

- Balancing holes of the impellers are dynamically balanced and minimizes axial loads.

- Cylindrical roller bearings that are resistant to high temperatures and can operate under heavy conditions are used at both ends of the pump.

- The discharge flange of the pump is on the motor side and the suction flange is below.

- With its vertical shaft structure, it occupies less space than horizontal shaft design.

- Boosters are manufactured with horizontal or vertical pumps.

- It can be produced as single, double and triple pumps according to the desired flow rate. Up to 6 pumps can be set if needed.

- Single pump booster has phase protection and sequencing relay (FKS).

- It is available water level float (electric float) in single pump systems.

- Multiple sets, phase control in multiple pump boosters and liquid level control are standard features.

- Pressure boosters can be frequency controlled upon request It can be manufactured with variable speed.

- Boosters it can work automatically and manually in two different modes.

For more details and price requests, please send an email to [email protected]