Waste Water and Process Pumps

CATEGORY : WASTEWATER AND PROCESS PUMPS

Waste Water and Process Pumps

Discharge Flange: DN 40 - DN 300

Capacity: up to 1600 m3/h

Head: up to 95m

Working Temperature: from -10 °C to + 110 °C*

Casing Pressure (Pmax): 10 bar (16 bar)*

PUMP DESIGN FEATURES

- Horizontal / Vertical, wide volute casing, single stage, end suction, centrifugal

- pumps with enclosed, semi-open or vortex type impeller.

- 18 basic sizes covering wide range of operational area

- Due to the back-pull-out design, the complete bearing assembly including
impeller and casing cover can be dismantled without removing the volute casing
from the pipe system. (With spacer coupling application, also possible to takeout the rotor group without dismantling the electric motor.).

- Discharge flanges conform to EN 1092-2 / PN 10. (EN 1092-1 / PN 10 for steel or

stainless steel casing) “All impellers are balanced dynamically or sta ally
according to ISO 1940 class 6.3.

- Axial thrust is balanced by impeller back ribs.

- Direction of rotation is clockwise viewed from drive end.

- Bearings of pumps are “life time grease lubricated” ball bearing up to 150-315

size. For bigger sizes oil lubricated bearings are used. In vertical design always

grease lubricated bearings are used.

PUMP USAGE AREAS

- Domestic and industrial raw sewage liquid transfer

- Sewage treatment plants

- Liquid transfer containing sludge and solid particles

- Factory waste water drain

“Transfer of viscous liquids and suspensions

“Transfer of liquids in paint plants

- Paper and cellulose industry Facilities

- Cooling water systems

- Iron and steel plants
 

For more details and price requests, please send an email to [email protected]